HƯỚNG DẪN CÀI ĐẶT TÍNH NĂNG REPEATER TRÊN ROUTER WIFI TENDA

Thisdocument applies for the users that want to thiết lập universal repeaterfunction

Model Number: N301/F3/FH456Question Classification: Function Settings

Part 1：Configure IPaddress of your computer

Part 2：Login to lớn the setuppage

Part 3：Setup UniversalRepeater function

Part 4: Checkwhether you can surf the mạng internet

1. Click onNetworkConnection Iconon the system bar, then click onOpen Networkand Sharing Center.

Bạn đang xem: Hướng dẫn cài đặt tính năng repeater trên router wifi tenda

2. ClickonChange Adapter Settings.

3.RightclickonLocal Area Connection, then choose thePropertiesoption.

4.DoubleclickonInternet Protocol Version 4(TCP/IPv4).

5.ChooseObtain an IP address automaticallyandObtainDNS hệ thống address automaticallyand then clickOK.

6.Alsoclick onOKon the firstLocal Connection Propertieswindow.

Xem thêm: Truyện Cổ Tích: Sự Tích Cây Vú Sữa, Sự Tích Cây Vú Sữa

Notice：If you use therouter for the first time, it will appear easy khổng lồ use interface in the processof you mix Universal Repeater mode, you need to skip these interface, go khổng lồ theadvanced Settings interface lớn set.

1.Open a browser thentype 192.168.0.1 in the Address Bar, press Enter，and login tothe router interface.

2.Clickthe "Skip" or “Next”.

3. Setrouter’s SSID và wireless password, and click Next, refer to the followingsteps.

4.“Saving…please wait…” Wait about 10 seconds, it will come out aninterface. Click “More” khổng lồ go to advanced setting page.

1.Enter the router"s setting interface，click “WirelessRepeating”. Choose bridge mode as “Universal Repeater”, selectyour uplink wifi signal, type wifi password of your uplink router, click “OK”to save all the settings. Then click “OK” on the pop-up window.

2. After click OK, the routerwill reboot automatically.

Notice：For the convenienceof management, when you thiết đặt Universal Repeater mode, we have lớn make surethis router’s IP address is different from uplink router’s address, but in thesame network segment. Such as if the uplink router’s IP address is 192.168.2.1,we have to lớn change this router’s IP address to 192.168.2.X, X∈(2~254).

Afterreboot, connect router’s LAN1/LAN2/LAN3 ports, or reconnect wireless signal ofthe router, try whether you can surf the internet.