TAI NGHE MI TRUE WIRELESS EARPHONES 2 BASIC

Mi True Wireless Earbuds Basic 2
EarbudsThe earbuds come with the form size M of ear tips installed, you can switch to kích cỡ S or L if the installed form size does not suit your ear.

Bạn đang xem: Tai nghe mi true wireless earphones 2 basic

WearingGently insert the earbud into the ear canal, make sure it is not easy khổng lồ sway when shaking your head.Please pay attention lớn adjust the earbud to

Charging

Before using the device, please tear off the protective film from the earbuds’ contact points to fully charge them and their charging case.

Connect the charging cable to lớn charge the earbuds and the charging case simultaneously. The indicator is red while charging, và changes to white once fully charged, then goes off after 1 minute.Turning OnOnce you remove the earbud from the charging case, it automatically turns on. In case the earbuds are not in the charging case và turned off, press and hold the multi-function button for 1 second till the indicator turns white.Turning OffOnce you place the earbud into the charging case, it automatically turns off. When the earbud is turned on, press & hold the multi-function button for 5 seconds till the indicator turns red.

ConnectionAutomatic Connection:Remove both earbuds from the charging case simultaneously, & wait for the earbuds khổng lồ automatically turn on. The indicator turns white and then changes into quickly blinking white & red alternately, which means the earbuds are connecting with each other.When the indicator of left/right earbuds slowly blinks white, please enable the công nghệ bluetooth không dây function on your device and search for “Mi True Wireless EBs Basic 2” to lớn connect.Once your device và earbuds are successfully connected, your earbuds will automatically connect khổng lồ the previously paired device (the bluetooth không dây is enabled) when they are turned on.Note: If you cannot pair the earbuds, place them back in the case & repeat the previous steps.Reset EarbudsIf the earbuds cannot connect properly, please carry out the following steps to reset:Remove the earbuds from the charging case, và make sure they are turned off. =Press & hold the multi-function buttons on both earbuds for about 15 seconds until the indicator alternately blinks red and white three times, then release the buttons và place the earbuds back in the charging case.Once the earbuds are reset successfully, the connection between your device và the earbuds are cleared, you should pair them with your device again.

Function OverviewThe following functions can be used on both earbuds:Answer/End callsGently press the multi-function button to lớn answer/ end calls.

Xem thêm: 20 Thiết Kế Mẫu Mặt Tiền Nhà Ống Đẹp Hiện Đại Phổ Biến Nhất Năm 2021

Reject a callPress & hold the button for 1 second to lớn reject a call.Play/Pause MusicPress the multi-function button to play/pause the music while using the earbuds.
Turn On Voice AssistantDouble press the multi-function button to lớn enable the voice assistant while using the earbuds. Note: The function of voice assistant and quick wake-up must be supported & enabled on your device.Answer a Second Call/Switch between CallsPress the multi-function button to answer the second incoming hotline during an ongoing call. Double press the multi-function button to lớn switch between the two calls.

Switch between Earbuds và DeviceDuring a call, press & hold the multi-function button for 1 second khổng lồ switch between the earbuds & your phone.Mute/UnmuteDouble press the multi-function button lớn mute/ unmute the earbuds during an ongoing call.PrecautionsWarning1. Vì chưng not disassemble, repair or modify the hàng hóa for any reason, as this may cause fire or even completely destroy the product.2. Vì not expose the product to environments where the temperature is too low or too high (below 0°C or above 45°C).3. Keep the indicators away from the eyes of children and animals while using the earbuds.4. Vày not use this product during thunderstorms. Thunderstorms may cause the sản phẩm to malfunction and increase the risk of electric shocks.5. Vì not wipe & clean the earbuds or their case with alcohol or other volatile liquids.6. Avoid any liên hệ with liquids.7. Excessive sound pressure from the earbuds can cause hearing loss.Illustrations of product, accessories và user interface in the user manual are for reference purposes only. The actual product và functions may vary due to hàng hóa enhancements.Note1. If the hàng hóa has not been used for more than 2 weeks, it is recommended to charge the product before use.2. Only use certified chargers supplied by qualified manufacturers.3. Continuous use of the earbuds for a long time is detrimental khổng lồ one’s hearing. Vì chưng not use the earbuds at a high volume for an extended period.4. Using earbuds can reduce the perception of external sounds. Vày not use earbuds in environments that may threaten safety. It is recommended khổng lồ only use a single earbud when outdoors.Due to lớn the connection characteristics of the bluetooth không dây signal, in dense environments with 2.4 GHz electromagnetic signal interferences, there may be occasional disconnects or no sound.SpecificationsName: ngươi True Wireless Earbuds Basic 2Model: TWSEJ061LSBluetooth Operating Frequency: 2402-2480 MHz (For EU)Max RF output đầu ra Power: EarbudsDimensions: 26.65 × 16.4 × 21.6 mmNet Weight: Approx. 4.1 g (per earbud)Wireless Range: 10 m (in an obstacle-free environment)Battery Capacity: 43 mAh (per earbud)Charging Time: Approx. 1.5 hMusic Playback Time: Approx. 4 h (earbuds only); approx. 12 h (charging case)Standby Time: Approx. 150 hInput: 5 V100 mABattery Type: Lithium-ion BatteryWireless Connectivity: công nghệ bluetooth 5.0Bluetooth Profiles: HFP/A2DP/HSP/AVRCPCharging CaseDimensions: 62 x 40 x 27.2 mmInput: 5 V- 500 mA Output: 5 V 150 mACharging Time: Approx. 2 hBattery Capacity: 300 mAhBattery Type: Lithium-ion BatteryStorage Temperature: 0 °C to lớn 45 °COperating Temperature: 0 °C to 45 °CService Life: 1 year

EU DECLARATION OF CONFORMITYHereby, Qianxing Inc., declares that the radio equipment type TWSEJ061LS is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.htmlCAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING to lớn THE INSTRUCTIONSDirect current
report this ad